7 Killer Hacks How To Use A Pole Saw Safely

7 Killer Hacks How To Use A Pole Saw Safely

We all like growing trees in our backyard, but they start creating a problem when the tree branches become too thick, or too high to cut. In situations like these, a person has to choose an option from three choices: they can either a hire a professional and pay him a good amount of money to do the job, they can use a ladder, or they can purchase a pole saw and do all the cutting by themselves. When there is something to you can do yourself, then you should not be hiring a professional. Therefore, in carrying out the job yourself, you will need a pole saw.

It is very understanding that as far as pole saws are concerned, they can appear to be quite lethal and dangerous, and one may start worrying about how to use it. There is nothing to worry about actually, and in this article, we will make sure that you learn all the tricks needed to use a piece of heavy equipment as a pole saw.

7 Killer Hacks How To Use A Pole Saw

  1. Clear A Large Work Area

 

Clear the area below the branch you are felling of all people and property and cordon off the area or otherwise keep people from re-entering. Also, clear the area of any trip hazards like fallen branches, and take note of ones you can’t move, like exposed roots. You need to be able to move quickly and safely in your area in case something goes wrong.

 

  1. Plan Where You Will Need To Cut

 

Remember that the removal of a single branch usually requires many preliminary and jump cuts to reduce the weight before your final cut. Try to make cuts at horizontal or nearly horizontal surfaces of the branch or vine, if you have a choice.

 

  1. Position The Saw

 

With both hands, bring your pole saw to a vertical position and pause there to control its weight. Now, reposition the saw to your cutting spot, with its weight resting on the branch (unless you are making a jump cut). 

 

  1. Position Yourself

 

Holding the tool, move to a place where you can hold your end at chest level while standing well off to the side of the limb, never below it. In other words, your pole will be at an angle while you cut, not directly up and down. If your pole is adjustable, you may need to lengthen it to make this possible.  

 

  1. Begin Cutting With A Starting Groove

 

Make the first strokes slowly and in control, cutting perpendicular to the branch so that your first strokes bite in as much as possible, even if the rest of your cut needs to go a different direction. The idea is to create a groove in the wood to guide your later, faster strokes. On these early strokes, your saw will want to slip sideways if the branch is sloped; expect this. When it slips, stop, gather your energy, and reposition the saw before you continue.

 

  1. Continue & Finish Your Cut

 

Once the saw is securely in the groove you can increase your stroke speed. Pole saws, just like pruning saws, cut on the pull stroke, helped by gravity. Keep your eye on the branch, especially as it nears the point of falling, to be ready to safely retreat if you need to. 

 

  1. Clean Up Your Area Of Work

 

Clear the fallen limb out of your work area before beginning the next cut, so that it does not trip you up.

 

4 Important Precautions To Keep In Mind When Using a Pole Saw

 

Once you are starting to think about pruning wood that you can’t reach from the ground, you’re getting into potentially dangerous territory. When professional arborists drop a large piece of wood, they use ropes in a pulley system to safely slow its descent to the ground. When you cut branches with pole saws and pruners, you can’t do that; you have to let the wood drop uncontrolled. High or heavy wood can damage, hurt, and kill when it falls.

  • Pole saws are intended to use on limbs up to a couple of inches thick. The thicker the wood, the more dangerous, and the slower and more tiring it will be to cut.

 

  • One must not try to cut overhead tree branches, until and unless they are familiar with the cutting techniques for reducing weight before making a final cut by making preliminary and jump-cut with your pole tools.

 

  • Pole saws, especially with extensions to get above 8 feet, are heavy and tiring to work with.

 

  • Do not ever work near power lines or on branches with any part above a power line.

 

Before the Cutting Process:

 

Before you take out those tools, it would be a good idea to do some research (Google is your best friend when it comes to research online) and look up how to prune the specific tree you’re trying to prune. You need to make sure the tree doesn’t require any type of special pruning technique. For example, there are some trees, like flowering trees and even fruit trees that should be pruned after they’re done blooming. On the same note, most evergreen trees don’t require any special pruning, unless you’re needing to remove dead growth.

 

5 Important Tips Keep In Mind When Using A Pole Saw

 

 

  • In most cuts, the blade starts from the top side of the branch.

 

  • When making a jump cut, the blade will cut from underneath the branch. This will be much more physically taxing cut since you work against gravity.

 

  • Water sprouts, which are vertical, are hard or impossible to cut properly from the ground with a pole saw.

 

  • It is fine to decide that you never want to do any kind of pruning you can’t reach from the ground. This is not something that commonly needs doing, and which you’ll never need to do if you don’t have a major tree on your property.

 

  • Before you use a pole saw for your first time, read about all the cautions and make sure this is really a job you should be attempting yourself.

 

10 Parts of Pole Saws

 

Before moving on with the cutting part, it is suggested that you know about the parts of pole saws. Take some time to familiarize yourself with the pole saw, so when you actually have to use it, it does not seem like a foreign object to you. The parts of pole saws are as follows:

  1. Chain Oil Bulb:

 

While you’re cutting, I suggest pressing the chain oil bulb every 30 seconds. By doing this, you will be releasing oil to the chain, which will help it run smoother.

 

  1. Front Hand Guard:

 

 This is a little piece located on top of the pole saw and it is responsible for protecting your left hand.

 

  1. Oil Level Window:

 

This shows you how much oil you have left for the chain. When you’re operating the pole saw, the oil shouldn’t get below half-way. If it does, stop and put oil in it.

 

  1. Guide Bar Tip and Guide Bar:

 

This is responsible for guiding and supporting the saw chain.

  1. Chain Oil Cap:

 

This is where you put chain and bar oil so that the chain can be lubricated when you’re operating it.

 

  1. Saw Chain:

 

This is the one doing the cutting.

 

  1. Bucking Spike:

 

As you’re cutting limbs, this will help you maintain stability.

 

  1. Extension Boom:

 

 If you need more reach, then the extension boom will help you – it attaches to the chainsaw.

 

  1. Rear Handle:

 

This will allow you to keep a nice grip on the saw.

 

  1. Throttle Lockout:

 

This is a safety feature on the pole saw that will prevent it from starting when it isn’t being used.

 

Why Should You Prune Trees?

 

There are numerous reasons as to why someone would want to prune a tree. It’s a good idea that you make tree maintenance in your yard a regular habit so that they can continue to grow and stay healthy.

Many people only think about trimming their trees after a big storm has damaged the branches or if the lower branches are hanging down and getting in the way. Some additional reasons to trim trees would be to encourage fruit and flower production, to prevent disease by giving the tree better airflow, to encourage the tree to grow bigger or to shape the tree to your desired shape.

 

What is the Best Time to Prune Trees?

 

The best time to prune trees would be when the tree has gone dormant. This means the best time to trim branches on the tree would be during the winter months. By cutting the tree while it is still dormant, this will lower the risk of pests getting in the open cut wounds and it will also lower the risk of the tree getting a disease. Pruning before spring will help promote new growth. If you live in an area where climates are harsh, then it would be a good idea to wait until the coldest weather is done before you prune the trees, which would be early spring or late winter.  In milder climates though, you can trim a tree anytime during the cold months. Don’t worry, if you want to trim tree branches during the spring and summer months, you can still do it. Damaged or dead branches can also be removed during this time. Just try to avoid cutting on rainy days or when it’s really humid outside.

 

4 Operating and Pruning Methods:

 

 

  • Start Small. If you’re new to trimming trees with a pole saw, it would be a good idea to start off small, then work your way into it.

 

  • Removing Large Limbs. When you’re removing large limbs from a tree, it is important that you take extra caution. When you remove large limbs, it can be risky to the health of the tree. It would be best that you leave them be unless you have a good reason to cut them, like if they’re damaged, or dead.

 

  • Take a Step Back. As you’re working on the tree, take a step back, and look at the tree from different angles. When trimming branches, it’s easy to get carried away.

 

  • Don’t trim more than ¼ of the living tree branches. If you have to trim any more than that, do it next year.

Conclusion

It is very understanding that using a pole saw looks complicated, but it is just the look that gives the idea. In reality, if you follow the above-mentioned directions, tricks, and trips, using a pole saw will not be a difficult task.

8 Easy Steps How to Restring a Pole Saw

8 Easy Steps How to Restring a Pole Saw

A pole saw blade is basically a pole with a saw attached at the end of it. The pole that the saw is connected to is usually extendable and reaches up to 10 or 20 feet, most of the time. The blade that is attached at the end is often a hacksaw with a slight curve. It is a piece of equipment that you must have for cutting and trimming trees. The pole saw blade is an important gardening and tree trimming tools. Knowing how to restring a pole saw blade is imperative knowledge for those who put their pole saw to use regularly.

When to Use a Pole Saw?

 

Tree trimming is essential for growing out healthy and strong trees and plants. Have you ever wondered though how difficult it would have been if the pole saw did not exist in the first place? Pole saws ensure the safety of the user as well. You may know that a pole saw is used for trimming and pruning, but do you also know the importance of the string of the pole saw?

A string is an important part of a pole saw and we should be restringing it on a regular basis. All our effort can be useless if the pole saw does not work properly. Therefore, the aim of this article is to teach the readers how to restring their pole saws, in order to ensure the efficiency and effectiveness of the tool.

 

Process of Using a Pole Saw

 

The process of restringing your pole saw blade is quite simple and can be done if you follow the eight easy steps, that are mentioned in this article. This article will serve as a complete guide on how to restring a pole saw. Before getting started with the whole restringing process, there are two preliminary steps that you must perform. The first one is to check whether the rope of the pole saw is sturdy or not; if it is not then referred to the eight easy steps to restring it. The second step that you need to take is that you need to ensure your safety wearing protective gear and taking relevant precautions.

 

Materials Needed to Restring a Pole Saw

 

In order to restring your pole saw, you will be requiring some essential materials and items. These materials are as follows:

  • One-fifteen or a long durable cord
  • Eyebolts
  • Sharp knife or a pair of scissors
  • Gloves for protection
  • Goggles for safety

 

8 Easy Steps to Restring a Pole Saw

 

If you are unsure of how to restring your pole saw, carry out the following easy steps, and you will be done with your job in no time:

 

Step 1: Wear Protective Gear.

 

As already mentioned above in the article, before you delve into the process of restringing your pole saw, you must wear protective equipment such as gloves and goggles to prevent any mishaps.

 

Step 2: Untie The Old Rope.

 

The next step is to check if your card has been damaged. If so, then it needs to be replaced. If you have two pulleys, then unthreading the old, damaged rope can be a little tricky.
If you have two pulleys, you should be careful in pulling the previous loop as it may loop over. You can use a screwdriver or ax for taking the rope away through pulleys and then untie the knot. If you have two pulleys, you should be careful in pulling the previous loop as it may loop over. You can use a screwdriver or ax for taking the rope away through pulleys and then untie the knot.

 

Step 3: Threading The Rope Finish.

 

 Thread the finish of the rope through the farthest possible from the handle through the outward-facing opening in the upper pulley.

 

Step 4: Tying The New Rope End.

 

Once you have un-looped the old rope, it is now time to tie the new one. Tie the end of the new rope to the anchor eye placed on the pole at the end of the moveable blade.
Now, depending upon the design of your pole saw, you must have to tie the rope to the grommet or on the anchor. A hitch or a bowline can be used to secure the end of the rope.

 

Step 5: Restringing The Pole Saw.

 

Pull the top of the rope upwards or downwards to the next pulley. Depending on the design of your pole saw, if the anchor eye is placed on the pole, then the first pulley should be located on the end of the lopper blade.
Vice versa occurs when the pole saw is designed to anchor the rope to the blade end. You can pull the blade towards, or away from the pulley.

 

Step 6: Securing The New Rope.

 

 In the absence of an anchor on the pole, you can screw an eye-bolt into the main pole in order to prevent the cord from flapping and becoming loose.

 

Step 7: Adjusting The Size Of The String.

 

A manual saw can be more easily operated using a shorter string. Therefore, you can then cut the rope to match your need. It can be cut to two or three feet. A wooden or plastic chuck can be used as a grip.

 

Step 8: Knotting The Rope.

 

Last but not least, in the event that you are using a cotton single polyester rope, you must remember to put a knot at the end of the cord.

 

Safety Precautions & Some Recommendations:

 

In order to complete the restringing process, there are a few extra steps that you need to adhere to. These steps are as follows:

 

  • Find and use a rope that seamlessly fits into the groove of the pulley.
  • In order to avoid friction, a polyester rope is preferred.
  • Always cover the blades before you restring your pole saw to avoid any accidents.
  • In order to further avoid any accidents and have a smooth running pruning and trimming process, you should use a handle with a good grip.

Conclusion

If you are an avid gardener and lawn groomer, then your pole saw is put to good use regularly. Therefore, it is imperative that you perform routine maintenance work on your pole saw. Check at frequent intervals whether the rope or cord of your pole saw needs replacement or restringing.

We hope that after reading this article now, you are now well versed in the process of how to restring a pole saw. The process is simple, quick, and hassle-free. Remember the additional guidelines and safety precautions, and you will be an expert at restringing at no time.

How to Use an Electric Pole Saw | Step By Step Guide

How to Use an Electric Pole Saw | Step By Step Guide

Pole saw is a tool that is used for chopping firewood, cutting down tree limbs, or just for trimming purposes. Having said that, it is quite different from the conventional tools that are found in our homes usually. The reason behind this is that pole saws require some training and practice by the user before they get into this process. Pole saws are designed in such a way that it helps to move out tree limbs. Pole saws can be both manual and electric.

We recommend that you go for an electric pole saw as they are easy and more comfortable to use instead of a manual pole saw. They are light in weight as well, which makes it the first choice for most of people. The electric pole saws allow the user to stand firmly on the ground and cut the branches of trees which are high up in the air.

Preparation Of Pole Saw Before Starting The Cutting Process

 

Most of the time, people are aware of how to use a manual pole saw. But once they get their hands on an electric one, they begin to doubt the existence of a manual pole saw. Electric pole saws are very easy to use; however, the difficulty depends upon the place you are going to use it. When you plan to use it in an outdoor setting, make sure to have a drag extension cord with you. This might sound tiring, but it is worth the pleasing results that you will achieve in the end. On the contrary, if you decide to use the pole saw in an indoor setting, it will be easy to use.

The pole has three segments that let it fold down and ready for storage. It is essential that you know the sections of your equipment very well. There are more risks involved if you are working with a tool that you are not familiar with. Hence it is something that we want to avoid at all costs. The motor of the pole saw is minimal, and so you would be able to sight the place you are working on. Upon pressing the switch, the blade of the pole saw gets started. Make sure to check your bag of accessories and manual that comes along with the equipment before jumping into the primary process. Read the details about the tool and then begin to start using it.

The manual saw works entirely as long as your target includes a few branches. However, electric pole saws are fast to clear up more trees in less time, as compared to a manual pole saw. Check your property with a keen eye and point out which curl you are going to work on. This is one of the most critical parts that you need to figure out first. Hence you really do not want to be the person who is in a confused state with a dangerous tool in their hands. Some electric pole saws come with a telescoping features which let you inspect the higher up branches of the tree, and makes your reach easily. To ensure that the task does not take much of your time, lubricate the chain before beginning the process.

The last step that you need to make sure is that the place you are going to clean is cleared. It is crucial that no people enter the area. Otherwise, they might be exposed to the risk of getting hurt. You need to be quick and rapid with the cutting process, or else it can prove to be a problem later on. Check beforehand that the blades of your pole saw are sharp enough.

Four Techniques Of How To Use An Eelectric Pole Saw

 

 

Step 1

 

To bring the pole saw in a vertical position, you need to use both hands for a good grip. Pause for a while to check if you have control over the weight of the equipment. While holding the pole saw, try to position yourself. Try to catch the end on your chest while standing on the side. For an adjustable pole saw, the height can be adjusted to ease up the process.

 

Step 2

 

While going for the first stroke, make sure you do it slowly, and not in a hurry. This is done in order to have control over the equipment. By doing so, the stroke bite becomes faster. Now you can create grooves, to fasten up the process of strokes. It is normal at this point to find that the pole saw is slipping to the side. This is caused when the branches slope. It is expected, so do not panic at this stage; just ensure that you have control over your pole saw. Then take a break to gather up energy. Reposition yourself after the short break, and continue stroking.

 

Step 3

 

When you find out that the saw is well placed on the groove, it means you have made it. Now you need to increase the speed of your stroke. At this stage, you will need the help of gravity and try to cut on the pull stroke. During this process, your eyes should be glued to the branch of the tree. Concentrate, focus, and try to bring together your full power and stability. Try not to make a mistake at this point since you are very close to being done now. Just before the branch falls down on the ground, make sure that you are in a safe spot, as you do not want the branch to hit you and cause injuries.

 

Step 4

 

After clearing up the tree branches, you need to clean up the place, clean your work area, and clear all the limbs that have fallen down. Before starting with a new cut, make sure that your worksite is cleared off, and the place is tidied up. This way, you will not trip and fall down.

 

Eleven Advantages Of Using An Electric Pole Saw

 

 

 

  • Easy to use even by beginners. An electric pole saw is more comfortable to handle and starts to function just by a press of a button.
  • No need for having a step ladder to reach higher branches of the tree.
  • There is a variety of pole saws available to choose from, according to your needs. For example, you are manicuring your trees, pruning limbs and branches, or trimming hedges.
  • Electric pole saws are light in weight, which is a very good character as it does not tire your arms and shoulders comfortably.
  • Electric pole saws are affordable and still have enough power to cut down branches several inches across.
  • You can choose the right length of the pole to meet your personal needs. You will find the adjustable buttons convenient when adjusting the size of the pole.
  • They are equipped with extra-power and fast cutting technology to work efficiently.
  • Electric pole saws require less maintenance with the automatic lubrication system delivering the right amount of lubricant to ease operations.
  • They take up less space and are easy to transport.
  • Pole saws have a long lifespan meaning they can give you hours of better experience pruning or cutting.
  • Cordless pole saws have a Lithium-Ion battery that provides long operation time.

Conclusion

As we conclude this article, we hope that you were able to gain something out of it. To be more accurate, try watching some YouTube videos and carry out extensive research as the chore is very risky. It is vital that you have stability over it, and you need to be as prepared as possible to carry out this activity. Do not carry out steps that you are doubtful of, and try not to get hurt. In the end, just be very focused and concentrate hard during the whole process. Good luck!

7 Easy Steps How to Cut Tree Limbs That Are Too High To Reach

7 Easy Steps How to Cut Tree Limbs That Are Too High To Reach

In order to maintain a green environment, it is important to plant trees. Trees grow very fast, and to make them look pleasing to the eyes all the time, they need to be pruned after a certain amount of time. Other than this, some trees need pruning as it enhances their health and growth. Some limbs or branches that need cutting are too high that it becomes impossible for a person to reach them standing straight.

To reach higher branches, the use of high limb rope saw is required. Therefore, there is a need for a better-enhanced mechanism for our environment to look better and avoid any associated risks. This article will highlight the best ways to cut tree branches that are too high for a normal person to reach, and any other details relevant to the cutting of trees.

Step 1: Use A Pole Pruner.

 

A pole pruner is an equipment that will make your cutting very simple and quick. If you are planning to purchase a pole pruner, first access the height of the branch or the limb that needs cutting. Keenness is essential when accessing the height because tree branches and limbs appear to be very close to the ground when in real sense there not.

To figure this out, you can compare the height of the branch or limbs with the nearby buildings or else use a tape measure to get the real height. Pole pruners came in different lengths where some can telescopic, fixed, or have a design that you can increase the sections to make it longer.

 

Step 2: Use A Pocket Saw With A Rope.

 

A pocket saw is simply a chain saw whose chain has the rope on both ends. With this cutting tool, you will throw the line over the limb that you are cutting then pull the rope. Keep the blade in the right position then get the cutting side on the branch and get on cutting. This tool is the most convenient tool that is simple to use and very affordable.

 

Step 3: Use A Pole Saw

 

Pole saw it is a cutting tool that is preferable for diameters larger than 11/2 inches. The blade of a pole saw has a curved shape to make the cuts towards the top part of the branch or the limb. The pole saw cuts by pulling it. This tool is free from pinching, which makes the cutting process hard. When you notice that the limb is moving downwards try to cut faster to avoid the limb from tearing much from the bark.

 

Step 4: Use A Ladder With A Pruner

 

Let us focus on cutting the limbs off the ground. In this case, you will need a sturdy ladder and a pruner. Place your ladder in a slightly slanting position. In case you are not sure of the stability of the ladder have someone to hold it for you.Also, you can tie it on the tree to avoid the ladder from shifting its position. Make sure you do not place the ladder on the limb or branch that you will be pruning. With the pruner climb the tree to the specified limb and branch.

 

Step 5: Rent Out Or Purchase A Bucket Lift

 

Furthermore, as a homeowner, you can rent a bucket lift available in your place. A bucket lift can be in a trailer type that you will have to pull with a truck or the ones that will need shipping to your doorstep. The bucket lifts have different capabilities and available in various sizes. The trailer type can lift to 40 feet. After positioning it in the place that you want to use it, place the outriggers to keep it stable. You can use the pruner to reach the canopies that you want to bring down.
The other type is the commercial self-propelling lifts that are more enhanced and can reach up to 125 feet. Nevertheless, there some considerations that you should make before making a bucket lift your choice. Make sure that you can drive the shipping vehicle to the spot without hindrances such as fence or plants. Ensure that the terrain of your location is not hilly.

 

Step 6: Climb The Tree Using A Rope And Harness

 

Climbing up the tree is the first idea that pops in your mind. Though its possibility depends on the type of the tree or the structure of the limb. Most of the evergreen trees are simple to climb and does not involve a lot of risks. The limbs that are too close to be together may pose some toughness while climbing and probably may need a professional climber.
You will need a rope system and help of a climbing harness to prune back the ends of a branch. After climbing the tree, you will require a cutting tool such as a pruner or saw to do the main exercise. If you will have to carry the cutting tool while you are climbing, place it in a position that it will not destruct your hands and legs, advisably tie it around your body.

 

Step 7: Call A Professional Arborist

 

Some heights are too risk that they can pose a lot of risks if you are just a novice in this field. The tree can have complicated branches or limbs that have a complicated structure, and none of the above equipment can be kept in use.

In some terrains pose a lot of danger when using a ladder, no matter how tight you tie it. Besides, some of the cutting tools might be too complex for you to use.

Nothing is worth your well-being, not even the tree in question. In such a situation, call a professional arborist to have them down without posing any danger.

Conclusion

Where planting trees is crucial, trimming branches is also very essential. The best way to cut down branches and tree limbs is to make sure you have the most appropriate tool in your hands. When choosing the cutting, observe the height of the tree and its diameter. Pick a well-performing tool and ensure that you keep the necessary safety measures in your mind.

Wear the right protective gear, and be very focused and vigilant if you are climbing a tree. In case the tree branches and limbs seem too complicated for you, do not be hesitant in calling in a professional. As simple as the task me seem to be, some techniques are crucial in this process. It is better to incur the extra cost and keep yourself and everyone around you safe from any largescale damages and/or injuries.

8 Best Pole Saw For Tree Trimming In 2020

8 Best Pole Saw For Tree Trimming In 2020

You may own different tools in your house which serve different purposes, but a pole saw is something that you may generally not find in your home toolbox. Instead, people like to keep it separate, away from children, as it can be very dangerous. However, while it can be dangerous, a pole saw can serve many purposes as well. One of the most common things that people use a pole saw for are for cutting and trimming the branches of a tree. Hence, pole saw is a tool that is mostly owned and used by gardeners or someone who has an interest in gardening.

Top Rated Pole Saws Comparison

[table id= 4/]

List Of 8 Best Pole Saws Reviews In 2020

1. Sun Joe 20-Volt Pole Saw

Specification

Great for overhanging limbs and thin logs; up to 15 ft. of overhead reach

Cutting thickness (max) 7.5 in.

Lightweight – just 9.25 lbs.

Telescoping pole: 5.2 ft. – 9.2 ft.

ETL approved; Full 2-year warranty

Overview

 

The Sun Joe 20V cordless pole chain saw makes it quick and easy to trim your overgrown trees. Powered by the same interchangeable 20V 2.0 Ah EcoSharp battery utilized by the other tools in the 20ViON series, the 20ViONLTE-PS8 provides the cutting performance of a comparable electric-powered unit with the convenience and freedom of a lightweight (only 9.25 lbs.!) cordless device. Operation is simple: SLIDE the telescoping pole (adjustable from 5.2 ft. to 9.2 ft.) to your desired length, PUSH the button to power on. WATCH its 8-inch self-lubricating Oregon cutting bar and chain make quick work out of overhanging tree limbs up to 7.5-inches thick, all while you stand safely on solid ground! Unlike gas powered tools, the 20V employs the most advanced EcoSharp lithium-ion battery technology to deliver whisper-quiet runtime with zero carbon emissions for cleaner air. A built-in safety switch prevents accidental starting, and 20V includes a protective sheath for safe blade storage when the day is done.

2. BLACK + DECKER 20V MAX Pole Saw

Specification

Extension allows for a useable length of 6 1/2 or 10 feet; overhead reach of up to 14 feet

Part of 20-volt MAX lithium ion battery system easily swap with other lawn and power tools

Up to 100 cuts of 1 ½-inch pine branches per charge

8 inch cutting bar and chain allows for a maximum cutting diameter of 6 inches

2 year limited warranty; does not include battery or charger

Overview

 

The BLACK+DECKER Bare 20V MAX Lithium-Ion Pole Pruning Saw is an excellent tool, designed for pruning overhead tree branches up to 14ft high. This bare tool is compatible with 20 V Max Lithium-Ion battery which provides a longer lifespan and 5 times longer charge than similar Nicd batteries (battery and charger not included). It has an 8″ cutting bar and chain that allows for a maximum cutting diameter of 6″. The center extension allows for a useable length of 6.5′ or 10′ and provides overhead reach of up to 14 feet. This unit also features an inline power head allows easy maneuverability and visibility between branches. Unit disassembles for easy transport. Perfect for transporting to the worksite. The lightweight design makes it easy to use. RPM: 375 rpm. Included components are 1 20V MAX pole saw with extension, blade guard oil bottle, and a wrench.

3. TrimmerPlus 8-inch Pole Saw

Specification

This pole saw’s expansive height makes it perfect for trimming high branches

8-inch bar and chain with auto oiler saws through branches

Connects to attachment-capable trimmers, including Troy-Bilt, Remington, and Craftsman

Backed by a 2-year limited warranty. Extended boom has two height options, up to 11 ft. reach (depending on operator height)

Reach up to 12 feet with a 7-foot pole and saw (depending on operator height), 2 extension sections allow for 2 height options.

Overview

 

The TrimmerPlus PS720 8-Inch Pole Saw with Bar and Chain is perfect for pruning and cleaning up your trees and hedges that are hard to reach. The pole saw connects to all attachment-capable string trimmers with no tools and the extended boom reaches up to 12 feet. This add-on TrimmerPlus pole saw can be used to trim branches on trees without using a ladder. The 8-inch bar and chain are lubricated with an automatic oiler to maintain peak cutting performance. The TrimmerPlus pole saw is backed by a 2-year limited warranty.

4. Fiskars Extend Tree Pruner

Specification

Easily cuts high branches with a sturdy tree trimming system that extends to fourteen-feet and features power-lever technology for up to two times more power.

Includes a precision-ground steel pruner for cutting branches up to 1-1/8-inch thick and a 15-inch WoodZig saw for removing larger branches.

Oval-shaped fiberglass poles greatly reduce flex, allowing you to control the direction of cut and fit the natural shape of your hand.

Secure double locking system ensures that the pole stays put.

To maintain it, clean with mild detergent. Oil Pivot points for smooth operation.

Full lifetime warranty.

Overview

 

High branches are within reach with the Power-Lever Extendable Pole Saw & Pruner, which includes two different cutting options and extends up to 14 feet. Unique Power-Lever technology increases leverage to give you up to 2 times more power than traditional designs. Plus, oval-shaped, lightweight yet strong poles reduce flex, allow you to control the direction of the cut, and fit the natural shape of your hand. A unique double locking system ensures the pole stays extended for superior control. Trim branches as thick as 1-1/8 inch with the sharp, durable steel pruner boasting a special low-friction coating for smooth cuts, reduced gumming, and enhanced rust resistance. For thicker branches, call on the power of the sturdy 15 inches WoodZig saw.

5. Gilmore 16-inch Curved Blade Pole Saw

Specification

Durable cast aluminum saw head

16-inch curved saw blade with non-stick coating

Three 6-feet by 1-1/4-inch diameter fiberglass pole

Hook for pulling down cut branches

Assembly required upon delivery of your product: Holes must be drilled through fiberglass pole to attach saw

Durable cast aluminum saw head; fiberglass pole

16-inch curved saw blade with non-stick coating

Overview

 

16″ curved saw blade with non-stick coating saw head is made of durable cast aluminum three 6 foot by 1-1/4″ diameter fiberglass poles pull-down cut branches with a hook. The manufacturer claims that the Gilmore’s Pole Saw is a quality tree pruner that is approved for use by phone and utility companies nationwide. The durability of Gilmore’s tools is widely recognized. Replacement parts are available to further the life of these hardworking products.

6. VonHaus 40V Pole Saw

Specification

No need for ladders with this product

Enhanced comfort

Telescoping pole

Safety in mind

Overview

 

The VonHaus is a 40V Max, lithium-ion cordless pole saw. It has a high reach with a telescoping pole which can extend from 8-feet to 10-feet. The 8-inch Oregon chain is used for bar and chain. The operations carried out from this pole saw are safe as there is a safety switch present in the design which is used to prevent any accidental starts with a protective blade cover for storage. Moreover, customers have reviewed it to be comfortable in use as it includes a shoulder strap which is made up of an auxiliary handle and foam grip.

The 2-Ah battery of the pole saw requires only 75 minutes to get charged and features an LED charging indicator light. The batteries of the pole saw are interchangeable.

7. ARS Long Reach Pruner

Specification

Drop forged blades

Telescoping handle

Adjustable head

Ergonomic grip

Single lever operation

Overview

 

ARS Telescoping Long Reach Pruner with Razor Edge. The blades are drop forged slim design for greater durability and cutting leverage. The blade is hard chrome plated for sap and rust resistance. The telescoping pole of the pole saw adjusts from 4-to-7-Feet in 3 stops with a single lever operation enabled by a single pin. The Ergonomically Designed Grip is made of light and strong aluminum die-cast which has a non-slip plastic coating for comfort and ease of handling. There is also a swing neck that allows for the head to +/- 30 Degree

8. Jameson Landscaper Pole Saw Kit

Specification

Versatile three-pole system for trimming a variety of height

Includes a six-foot base pole, six-foot extension pole and a six-foot extension pole with a saw head for eighteen-feet of reach

Low profile head maneuvers through dense foliage

16-inch Barracuda tri-cut saw blade for quicker, cleaner cuts

Aluminum ferrules with external leaf spring locking button

Overview

 

Landscape package contains tools to handle tree trimming jobs. Pole ferrules allow any combination of poles with the pole saw to achieve different lengths, depending on the job. Pole saw features a Tri-cut edge for a cleaner, more efficient cut. Saw head permanently mounted on a six-foot pole.

3 Types of Pole Saws

 

1. Gas Pole Saw:

 

Gas Pole Saw is able to prune the thickest of branches and grass in your garden, but you beautify and take your garden’s aesthetics to the next level. Owning big and heavy equipment might seem difficult to use but when you have the best gas pole saw, all this will be a piece of cake for you, and you will never have to hire a professional and spend your money on them to maintain your backyard or your front lawn.

The term gas pole saw may be confusing to you, but in simple terms, it means a saw which is attached to the end of a long pole. Now, this pole saw can be manual, it can be electric, it can be powered by a battery or by petrol. The pole saws that are powered via petrol are called gas pole saws.

 

Characteristic Of Gas Pole Saw:

 

It is heavier than Electric pole saw

  • It is heavier than Electric pole saw
  • It creates more noise
  • It is commonly used by professionals
  • It generates smoke
  • The engine range is 20 cc to 40 cc
  • Air pollutant

 

2. Electric Pole Saw:

 

Electric pole saws are easy and more comfortable to use instead of a manual pole saw. They are light in weight as well, which makes it the first choice for most of people. The electric pole saws allow the user to stand firmly on the ground and cut the branches of trees which are high up in the air.

 

Characteristics Of Electric Pole Saw

 

  • It is lightweight
  • It creates comparatively less noise than gas-powered saws
  • It can cut the branches that are 2-5 inches thick.
  • Cannot be used in extreme weather conditions

It is subdivided into two types:

  • Corded Pole Saw
  • Cordless Pole Saw

 

3. Manual Pole Saw:

 

A manual pole saw has a saw attached to one end of a long pole. This helps you to trim tree branches without the need for a ladder. Since the system is all manual, there is no chainsaw involved in the design like those found in electric or gas pole saw models.

 

Characteristics Of Manual Pole Saw

·

  • They are durable
  • They are lightweight
  • They do not produce noise

 

 

3 Uses of Pole Saw

 

Primarily, pole saws can be used to complete three processes:

 

1. Pruning:

 

Pruning means cutting selected branches to shape a tree for decoration purposes o to improve the growth of the tree by next year, for example. This process requires careful cutting and planning to ensure the end achieves the best results. You should never prune in the autumn season. However, do plan your pruning season to accord with the anticipated outcomes.

 

2. Trimming:

 

Trimming means the removal of dead, dying, or any branches that may cause an obstruction. This process is carried out for the purpose of safety or for necessity.

 

3. Brush Clearing:

 

The process of using a pole saw to clear out the undergrowth and another ground cover for the purpose of construction on fire control.

 

8 Characteristics To Be Look In The Best Pole Saw

 

Weight

 

When buying a pole saw, the first thing you need to consider is weight. Different brands offer different weights of pole saws. For example, the Craftsman brand provides a maximum of 9.7 lbs. of cordless pole saw, and the Worx brand offers the highest of 10 lbs. cordless pole saws. The weights of cordless pole saws of the Remington brand are a maximum of 9.5 lbs. The lower weight of cordless pole saws is manufactured by Black and Decker, and GreenWorks, 6.3 lbs., and 7.96 lbs. respectively.
Thus, when you think to buy the best cordless pole saw, you should consider the weights. If you think you can carry the substantial weight of pole saws, you can choose one from Craftsman, Worx, and Remington. On the other hand, if you think a manual pole saw is suited for you, you can consider Black and Decker, and GreenWorks brands.

 

2. Safety Concern:

 

Pole saw is the dangerous piece of equipment and carries specific risks with it. Imagine that you are holding 10-feet chainsaw over your head while cutting branches. That is why you should choose the one that has ergonomic, anti-slip, and anti-vibration grip so that you can use it for an extended amount of time.

 

3. Design:

 

Choosing the right pole saw for your needs means that you have to find the perfect balance between weight and power. Have in mind that you will hold the pole saw over your head, which means that heavier models can cause muscle strains. On the other hand, the entry models are lightweight but lack in power. That is why you should choose the model that has enough power and weight that you can handle, and has the best design that fulfills your personal needs.

 

4. Power:

 

The chainsaw power is dependent on the power rating of a gas engine that is usually an internal combustion engine. The power of the engine is denoted in the CC, and the higher the power rating of the engine means need of bigger size engine and the extra weight of the pole saw. You can choose the engine power from 25cc to 43cc, but for most residents, the 25cc should be enough to handle most of the tree branches in the medium size garden.

 

5. Pole Length:

 

The pole length attaches to the chainsaw and determines how high you can go when cutting branches. There is multiple pole length saw available, and you want the size which fits most of your gardening needs.

 

6. Budget:

 

Considering the price is also essential for you when you want to buy a pole saw. Pole saws can be found in different price ranges. For example, when it comes to cordless pole saws, they are available in three different price classes that are under $100, between $100-$250, and above $250.

 

7. Warranty:

 

Well, most of the well-branded manufacturers offer a warranty for their products. It varies with different products and brands. So, you better check and ask for the warranty details. You may have some issues with the product. In that case, the warranty can help you out.
Do not forget to ask about the shipment process. Inquire properly about the places where the shipments are available. Check out the best electric pole saw reviews of different customers. That will help you to know about their experience with the product, its shipment, and warranty.

 

8. Fuel Type:

 

You also need to check what fuel type or what energy source does the pole saw require. For example, if you want a gas pole saw, you will need to fuel it up with gas or petrol. On the other hand, electric pole saws get their energy from electricity. Similarly, if you are looking for a more environment-friendly option, then you should not choose gas pole saws as they take up more energy. Electric pole saws, on the contrary, useless and sustainable form of energy which makes them eco-friendlier.

 

6 Safety Tips To Keep In Mind Using Pole Saw

 

 

  • Read the manual or any kind of instructions that come with the pole saw. Before using your brand new equipment, you need to know about the instructions of using it sent by the manufacturer. Take a good amount of minutes to learn about the teachings of saws and specifications of the saw tools before you begin to use your pole saw.

 

  • Plan out the area you want to work and figure out a cutting schedule. Ward off the place where you plan on trimming, mainly if you are decorating and cutting branches and trees. If you are alone and not experienced, it is recommended that you bring someone along with you for help.

 

  • Be careful when you plan to cut thick tree branches. Pole saws are primarily designed to trim trees and branches that are thicker.

 

  • You need to be very focused and vigilant while cutting high tree branches. Before you start the trim of branches that are at a high level, you need to ensure that you know your machine well.

 

  • Be careful while using the extension. Pole saws extensions can provide you the extensive reach, more than fifteen feet, but they can become heavy in weight, which may leave you exhausted. This is more likely to happen if you are doing heavy-duty work.

 

  • The most important safety tip that you need to comply with is that make sure you are wearing safety gear. This includes wearing protective goggles for your eyes, a hard hat to protect your head, and gloves to protect your hands.

 

Maintenance Of A Pole Saw | 6 Easy Steps

 

 

  • Use power lines properly. Do not cut your trees or branches near the saw tools power lines, or trim branches that are not far away from the saw tools electric lines.

 

  • Check that the mechanism of the trigger has been functioning correctly and provide the visual examination to search for any kind of damage, breaks or debris stuck from earlier usage else that looks disbelieving.

 

  • Before applying pole saw you should check that all bolts and nuts of the saws are tightly bound, and there are not loose knotted in any parts of the saw tools components.

 

  • You must also manage and check your pole saw regularly. It refers to checking all electrical connections and cables and the oil level checking.

 

  • When you plan to clean the machinery and parts unplugs of pole saw or eliminates the saw battery. Try to find out the problems of any damage which may have happened during the usage of the saw.

 

  • If you find out any leak in the oil tank during the examination of saw checking, your warranty given by the manufacturer will help to decide the accurate course of action to fix it. First, try to repair or recover it yourself. If it is not improved, then contact the manufacturer or technicians.
1. What is a pole saw?

In simple words, a pole saw is a saw on the end of a pole. It could be electric, gas-powered, cordless, or manual.

2. What is the best pole saw?

There are plenty of options for pole saw on the market from various brands. From these, you can choose the suitable one for you.

3. What do pruning shears look like?

Pruners or pruning shears are used to shape plants, prune out dead, deadhead, or damaged foliage and cut back perennials.

4. What is a pole pruner used for?

A pole pruner is an effective tool with quite sharp blades. Thus, it is used to cut branches overhead to 12 feet or more without a ladder.

5. Why do we prune trees?

Pruning trees can remove specific branches, stems to benefit the whole tree. It also removes dead, damaged, and diseased limbs to help prevent decay organisms.

Conclusion

​The technological advancement in this digital age is motivating people to be in pace with the latest and upcoming tools and equipment. If you need a pole saws, you can choose a cordless pole saw. A great cordless pole saw includes the newest technology by conceptualizing the concept of saving your time and efforts.

However, as the prices of cordless pole saws vary from vendors/brands, you need to consider what type of cordless pole saws is suited for you within your budgets.

Besides, you need to consider the warranty on products because the terms and conditions of warranty differ from brands/vendors to brands/vendors. You should also find the maximum reach, cutting capacity, and weights. In this case, you can review a different kind of cordless pole saws offered by several brands and vendors.