In order to maintain a green environment, it is important to plant trees. Trees grow very fast, and to make them look pleasing to the eyes all the time, they need to be pruned after a certain amount of time. Other than this, some trees need pruning as it enhances their health and growth. Some limbs or branches that need cutting are too high that it becomes impossible for a person to reach them standing straight.

To reach higher branches, the use of high limb rope saw is required. Therefore, there is a need for a better-enhanced mechanism for our environment to look better and avoid any associated risks. This article will highlight the best ways to cut tree branches that are too high for a normal person to reach, and any other details relevant to the cutting of trees.

Step 1: Use A Pole Pruner.

 

A pole pruner is an equipment that will make your cutting very simple and quick. If you are planning to purchase a pole pruner, first access the height of the branch or the limb that needs cutting. Keenness is essential when accessing the height because tree branches and limbs appear to be very close to the ground when in real sense there not.

To figure this out, you can compare the height of the branch or limbs with the nearby buildings or else use a tape measure to get the real height. Pole pruners came in different lengths where some can telescopic, fixed, or have a design that you can increase the sections to make it longer.

 

Step 2: Use A Pocket Saw With A Rope.

 

A pocket saw is simply a chain saw whose chain has the rope on both ends. With this cutting tool, you will throw the line over the limb that you are cutting then pull the rope. Keep the blade in the right position then get the cutting side on the branch and get on cutting. This tool is the most convenient tool that is simple to use and very affordable.

 

Step 3: Use A Pole Saw

 

Pole saw it is a cutting tool that is preferable for diameters larger than 11/2 inches. The blade of a pole saw has a curved shape to make the cuts towards the top part of the branch or the limb. The pole saw cuts by pulling it. This tool is free from pinching, which makes the cutting process hard. When you notice that the limb is moving downwards try to cut faster to avoid the limb from tearing much from the bark.

 

Step 4: Use A Ladder With A Pruner

 

Let us focus on cutting the limbs off the ground. In this case, you will need a sturdy ladder and a pruner. Place your ladder in a slightly slanting position. In case you are not sure of the stability of the ladder have someone to hold it for you.Also, you can tie it on the tree to avoid the ladder from shifting its position. Make sure you do not place the ladder on the limb or branch that you will be pruning. With the pruner climb the tree to the specified limb and branch.

 

Step 5: Rent Out Or Purchase A Bucket Lift

 

Furthermore, as a homeowner, you can rent a bucket lift available in your place. A bucket lift can be in a trailer type that you will have to pull with a truck or the ones that will need shipping to your doorstep. The bucket lifts have different capabilities and available in various sizes. The trailer type can lift to 40 feet. After positioning it in the place that you want to use it, place the outriggers to keep it stable. You can use the pruner to reach the canopies that you want to bring down.
The other type is the commercial self-propelling lifts that are more enhanced and can reach up to 125 feet. Nevertheless, there some considerations that you should make before making a bucket lift your choice. Make sure that you can drive the shipping vehicle to the spot without hindrances such as fence or plants. Ensure that the terrain of your location is not hilly.

 

Step 6: Climb The Tree Using A Rope And Harness

 

Climbing up the tree is the first idea that pops in your mind. Though its possibility depends on the type of the tree or the structure of the limb. Most of the evergreen trees are simple to climb and does not involve a lot of risks. The limbs that are too close to be together may pose some toughness while climbing and probably may need a professional climber.
You will need a rope system and help of a climbing harness to prune back the ends of a branch. After climbing the tree, you will require a cutting tool such as a pruner or saw to do the main exercise. If you will have to carry the cutting tool while you are climbing, place it in a position that it will not destruct your hands and legs, advisably tie it around your body.

 

Step 7: Call A Professional Arborist

 

Some heights are too risk that they can pose a lot of risks if you are just a novice in this field. The tree can have complicated branches or limbs that have a complicated structure, and none of the above equipment can be kept in use.

In some terrains pose a lot of danger when using a ladder, no matter how tight you tie it. Besides, some of the cutting tools might be too complex for you to use.

Nothing is worth your well-being, not even the tree in question. In such a situation, call a professional arborist to have them down without posing any danger.

Conclusion

Where planting trees is crucial, trimming branches is also very essential. The best way to cut down branches and tree limbs is to make sure you have the most appropriate tool in your hands. When choosing the cutting, observe the height of the tree and its diameter. Pick a well-performing tool and ensure that you keep the necessary safety measures in your mind.

Wear the right protective gear, and be very focused and vigilant if you are climbing a tree. In case the tree branches and limbs seem too complicated for you, do not be hesitant in calling in a professional. As simple as the task me seem to be, some techniques are crucial in this process. It is better to incur the extra cost and keep yourself and everyone around you safe from any largescale damages and/or injuries.